How To Use My Laptiop Ip Camera

In this article, there are v ways you can connect your Security IP Camera to your computer. And we volition cover the steps on how you should do it without a router, without cyberspace, without a DVR/NVR or without its receiver. The following table summarizes the of import data almost connecting IP camera to your computer for your reference.

Camera types:	POE photographic camera or WiFi camera
OS(operation organisation):	Windows or Mac
Cable:	ii-in-1 or iii-in-i cable attached from the camera
Remotely access by:	Camera's UID

Note: First you should install the security camera in the right place. You can refer to How to Install Domicile Security Cameras Successfully.

five Methods to Connect Your Security IP Photographic camera to PC/Mac：

To brand information technology easier for y'all to find the right solution, you can click and spring directly to the section yous desire.

For instance, if your camera is a PoE camera, then you tin choose option 3 or 4.

ane. Connect Directly to PC/Mac (without Internet)
2. Connect via Router (with Internet)
3. PoE (Wired) Camera without Injector/Switch
four. PoE (Wired) Camera with Injector/Switch
v. Connect a CCTV Camera System to PC/Mac

Important Note: The methods recommended beneath may Non employ for the battery-powered security cameras, which require initial setup on your phones.

Connect a WiFi or PoE Camera Directly to PC/Mac (without Net)

Hither's how to connect your security IP camera directly to a PC/Mac without an NVR or DVR, without a router network, without WiFi, and without any costs or complicated configurations.

you need to prepare the camera'south power adapter and a network cable.

1. Go your security camera charged.

Use the power adapter to go the photographic camera plugged-in and charged. Normally, when y'all buy a WiFi IP camera, it comes with a ability adapter. For a PoE camera, enquire the supplier and buy one that'southward workable for the camera.

ii. Utilise the network cable to connect to the camera and the reckoner.

Normally there would be a 2-in-1 or three-in-1 cable attached from the camera. Find the network connector from that cable and apply the network cablevision to connect to information technology. Then connect the other terminate of the network cablevision to the reckoner. If your computer has a network already, disable it – make sure your computer is offline. Connect IP Camera Directly to PC

three. Browse and find out the security camera's IP address on the estimator.

At present the security camera is connecting to your computer basically and physically. Simply y'all withal can't view the camera on the computer. What you demand to do now is to scan and discover out the photographic camera's IP address. There should be surveillance software from the same supplier with the camera. Accept our test every bit an example. We take Reolink Client on the figurer. Launch it and information technology will automatically browse all the cameras in the same local LAN and show the default IP accost (every photographic camera has a default and unique IP address when it leaves the manufacturing plant). Piece of cake peasy! Camera IP Address

4. Alter the computer'due south IP accost to the aforementioned network prefix of the IP camera.

Then in Step 3, you get your security camera's default IP address. In our test, the default IP address of the camera nosotros use is 192.168.177.100, and at present y'all need to change your computer's IP address to 192.168.177.x, where x identifies the node/host and is the number between 2 and 254. So let's say the computer's IP address is 192.168.177.12.

IP address 101: An IP address consists of ii parts – one belongs to the network address and one belongs to the node accost. All nodes on a given network share the aforementioned network prefix just accept a unique host number.

At present to change the figurer's IP address (we take Windows 10 as an example):

one) Printing the Windows + R keyboard shortcut to bring out the Run box.

two) Enter "ncpa.cpl" and open the "Network Connections" window.

Computer Run Box

3) Right-click your computer' network adapter and select "Properties".

Network Adapter Properties

iv) Select your computer's Internet Protocol Version and click "Properties".

Internet Protocol Properties

five) Select "Utilize the following IP accost" and change the IP address into 192.168.177.12.

Change Computer IP Address

And washed. At present your IP camera is connecting directly and communicating with your PC, because they are at present in the aforementioned little LAN. Y'all can lookout your IP photographic camera with Reolink Client on your computer.

Important: Since there is no router network, the IP camera would not transmit data or send alarms to your phone. Still, you can tape and relieve all the footage onto your figurer.

If you're gonna use your IP camera with the computer all the time like this (without router network), you'd ameliorate modify the default status of your IP camera's IP address to the static to keep it the aforementioned all the time, because each fourth dimension you reboot the IP camera, its IP address will be changed and y'all will demand to practice all the steps higher up over again. To keep the IP camera'southward IP address the aforementioned all the time, head to "Device Settings" and "Network General" on the Client (Reolink Client in our exam), and choose "Static" for "Network Access". And done. Static IP Address for Camera

Connect a Wireless/WiFi Photographic camera to Estimator via Router (with Internet)

If you practice have WiFi network and need to remotely encounter the IP camera when you're non there, you tin connect your wireless or WiFi camera to computer wirelessly via your router. Delight note that you demand to take, at to the lowest degree, a power adapter for the camera, a network cable, and a router.

1. Get your WiFi security photographic camera charged.

Use the power adapter to get the camera plugged-in and charged.

ii. Use the network cable to connect to the camera and the router.

A WiF camera needs to connect to the router with a network cablevision for initial setup, because the new photographic camera itself wouldn't recognize and machine-option up a network that it never uses. Merely after the correct WiFi settings can you disconnect the cable from the camera and the router. And yeah once again, normally there would be a 2-in-ane or 3-in-i cablevision attached from the WiFi photographic camera. Discover the network connector from that cable and use the network cable to connect to it. Then connect the other stop of the network cablevision to the router. Connect WiFi Camera to PC

iii. Watch the IP camera on PC/Mac

On the computer, launch the surveillance software to add together the camera and watch live view straight. In our exam, we open Reolink Client. Since the computer and the camera are in the aforementioned network (using the aforementioned router network), Reolink Client automatically searches and displays the camera directly. Click "Offset" and you can view the camera on PC. And you tin gear up the configurations for all the functions you desire the photographic camera to have.

4. Set up WiFi settings and remove the network cable.

Do call back to make the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Choose the WiFi network and enter the password, and washed. Cameras from the different brands would have different WiFi settings. Please refer to the guides you get from your supplier. After that, remove the network cablevision, and and so the security IP CCTV camera connects to the figurer wirelessly.

Important: If you need to see the IP camera from another computer that is not in the same network, yous demand to input the photographic camera's UID into the software to remotely access the camera.

Connect a PoE (Wired) IP Camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP photographic camera to a calculator via the router is similar to that of a WiFi camera, and even much easier – y'all don't need to use a power adapter, ready upwards the WiFi and remove the network cablevision. And you lot demand at least i network cable, and a router with PoE adequacy to complete the setup.

one. Use the network cable to connect to the camera and the router.

PoE (Power over Ethernet) means you can just use a single network cable for both video and power transmission. So just connect the camera to the router via the network cable, and the camera will go power supply and network access. Cloud Storage Delight make sure your router has the PoE feature. If not, try the adjacent method.

2. Watch the IP camera on the computer.

On the computer, launch the surveillance software to add the photographic camera and watch alive view directly. In our test, nosotros open Reolink Client. Since the figurer and the photographic camera are in the aforementioned network, Reolink Client automatically searches and displays the camera direct. Click "Start" and you tin can view the photographic camera on PC. And y'all can ready the configurations for all the functions you lot want the camera to have.

Important: If yous need to see the IP photographic camera from some other computer that is non in the same network, you need to input the camera's UID into the software to remotely access the photographic camera.

Connect a PoE (Wired) IP Photographic camera to Computer with PoE Injector/Switch

If your router does not support PoE, yous demand a PoE injector or PoE switch to aid connect your IP photographic camera to PC.In guild to complete the setup y'all need at to the lowest degree a network cable, a router, and a PoE injector or PoE switch. Since the steps on how to connect a PoE IP photographic camera to PC via PoE Injector/switch are quite the aforementioned to that of connecting without a PoE Injector/switch, we'd like to make it more simpler to sympathise hither.

1.connect the security camera, router and PoE injector

Connect all the devices every bit the picture showed below, make sure your wireless IP camera is connected to a power supply. PoE Camera Connecting to PC

2. Open Reolink Client & add the camera direct

You lot can now open Reolink Client on your reckoner, add the camera and watch live view straight. If y'all need to see the IP photographic camera from another figurer that is not in the same network, you need to input the camera's UID into the software to remotely admission the photographic camera.

Of import: Once you connect the PoE IP photographic camera to the PoE injector or switch which is continued to a router via Ethernet cables, you've successfully continued the camera to the network. For a wireless IP camera, yous need to use a network cable to connect it to the router if you haven't prepare the WiFi network configuration. And so the wireless IP camera is in the network. You can set up the WiFi configuration afterwards to make the wireless IP camera connect wirelessly.

Connect a CCTV Camera System to PC/Mac (with or without Network)

If you are using a CCTV photographic camera system, similar the Reolink PoE kit RLK8-410B4, instead of single security photographic camera, you may demand the post-obit tutorial. A CCTV camera system frequently take their own proprietary networks, and tin can work with and without your router network.

1. How to connect a CCTV security camera system to a calculator without router network

Connect all the cameras to the NVR:When you receive the new IP camera system you lot bought, connect all the devices you got – connect the NVR to your computer's monitor and the mouse, utilize the power adapters to charge the NVR and cameras, etc. For a WiFi organisation, once the WiFi NVR and the WiFi cameras are charged, they connected to each other automatically and would start to communicate. For a PoE system, connect the PoE cameras to the NVR via the network cables provided.
Outset watching the IP cameras:The startup and setup magician will popular up to guide you to watch your cameras and exercise other configurations.

Now you tin can see all the IP cameras on your monitor and start recording.

2. How to connect a CCTV security photographic camera system to a reckoner with router network

Do the step one shown in a higher place again.
Connect the NVR to your router via the network cable provided.
Start watching the IP cameras.

The startup and setup wizard will pop up to guide y'all to watch your cameras and exercise other configurations. If you demand to see the IP cameras from another computer that is non in the same network, you need to input the NVR'south UID into the software to remotely access the cameras.

Inforgraphic:

The infographic below also covers our five methods to connect IP security camera to PC/Mac . Promise this can exist helpful to you lot.

How to Connect Security Camera to PC

3rd-Party Software to Connect IP Camera to PC/Mac

You tin can too opt for third-party software to connect and gear up a security camera on the computer. Make sure the software can handle all the cameras on the network and support all the features for the cameras. Commonly, the third-party software has several versions. And if yous want to use total features of the camera, you lot need to pay for a premium version. If your security IP photographic camera is not working properly as expected or if you get any problems, you tin try the top 10 solutions to ready IP cameras not working.

For whatsoever questions, delight don't hesitate to go out it in your comment. I volition reply as presently as possible.

Source: https://reolink.com/connect-security-ip-camera-to-pc/

Posted by: crossleyhustend.blogspot.com